Vol. 14, No. 3, pp. 479-495(2018)
A NEW NUMERICAL MODELLING APPROACH FOR
FLEXIBLE ROCKFALL PROTECTION BARRIERS
BASED ON FAILURE MODES
X. Qi1, Z.X. Yu2*, L. Zhao3, H. Xu4 and S.C. Zhao5
1 Lecturer, School of Civil Engineering, Southwest Jiaotong University, Chengdu, China State Key Laboratory
of Geohazard Prevention and Geoenvironment Protection, Chengdu University of Technology, Chengdu, China
2 Associate Professor, School of Civil Engineering, Southwest Jiaotong University, Chengdu, China
3 Reseacher Fellow, Department of Civil and Environmental Engineering,
The Hong Kong Polytechnic University, Hong Kong, China
4 Lecturer, School of Civil Engineering, Southwest Jiaotong University, Chengdu, China
5 Professor, School of Civil Engineering, Southwest Jiaotong University, Chengdu, China
*(Corresponding author: E-mail:This email address is being protected from spambots. You need JavaScript enabled to view it.)
Received: 15 August 2017; Revised: 3 September 2017; Accepted: 18 November 2017
DOI:10.18057/IJASC.2018.14.3.10
 View Article |
Export Citation: Plain Text | RIS | Endnote |
ABSTRACT
To study the mechanical behaviour of the flexible rockfall protection barriers under impact load, four full-scale impact tests involving protection capacities of 750 kJ and 2000 kJ were conducted, including two successful and two failed tests. The experimental results show that the system has three working stages. Among these three stages, the second and the third stages play significant roles in both absorbing the impact energy and ensuring the system performance reasonable. Based on the observed failure modes in the tests, the key factors leading to the breakdown of the system are investigated. A new numerical modelling approach is established, which is able not only to predict the capacity of the flexible protection barrier subjected to the rockfall impact but also to accurately simulate the main failure modes such as buckling of the steel post and breakage of the rope. The experimental results are employed to assess and verify the calculation model, and the numerical responses of the system are in good agreement with the test data. Furthermore, a flexible rockfall protection barrier with a capacity of 5000 kJ is designed by using the numerical procedure as an effective tool, shown by a full-scale impact test.
KEYWORDS
Rockfall protection barrier, full-scale testing, finite element model, dynamic response, failure mode
REFERENCES
[1] Gottardi, G., Govoni, L. and Mentani, A., “The Effectiveness of Protection Systems Toward Rockfall Risk Mitigation”, 2011 Bundesanstalt für Wasserbau. Vogt, Schuppener, Straub & Bräu, 2011, pp. 157-164.
[2] Has, B., Hanaoka, M., Nozawa, E., Momose, A. and Sasaki, K., “Behavior and Mechanism of Earthquake-Induced Landslides within Pre-Existing Landslide Topography: the Case of the 2004 Mid-Niigata Prefecture Earthquake, Japan”, Disaster Mitigation of Debris Flows, Slope Failures and Landslides, Japan, Interpraeven, 2006, pp. 35-46.
[3] Castro-Fresno, D., Diaz, J.J.D.C., López, L.A. and Nieto, P.J.G., “Evaluation of the Resistant Capacity of Cable Nets using the Finite Element Method and Experimental Validation”, Engineering Geology, 2008, Vol. 100, No. 1, pp. 1-10.
[4] Díaz, J.J.D.C., Nieto, P.J.G., Castro-Fresno, D. and Rodríguez-Hernández, J., “Nonlinear Explicit Analysis and Study of the Behaviour of a New Ring-type Brake Energy Dissipator by FEM and Experimental Comparison”, Applied Mathematics and Computation, 2010, Vol. 216, No. 5, pp. 1571-1582.
[5] Castanon-Jano, L., Blanco-Fernandez, E., Castro-Fresno, D. and Ballester-Muñoz, F., “Energy Dissipating Devices in Falling Rock Protection Barriers”, Rock Mechanics and Rock Engineering, 2016, Vol. 50, No. 3, pp. 603-619.
[6] Muhunthan, B. and Radhakrishnan H., “Finite Element Analysis of Hybrid Barrier for Rock Fall Slope Protection”, Final Report, Department of Civil and Environmental Engineering, Washington State University, 2007.
[7] Arndt, B., Ortiz, T. and Turner, A.K., “Colorado’s Full-Scale Field Testing of Rockfall Attenuator Systems”, Transportation Research E-Circular, 2009.
[8] Peila, D., Pelizza, S. and Sassudelli, F., “Evaluation of Behaviour of Rockfall Restraining Nets by Full Scale Tests”, Rock Mechanics & Rock Engineering, 1998, Vol. 31, No. 1, pp.1-24.
[9] Gentilini, C., Govoni, L., Miranda, S.D., Gottardi, G. and Ubertini, F., “Three-dimensional Numerical Modelling of Falling Rock Protection Barriers”, Computers and Geotechnics, 2012, Vol. 44, No. 44, pp. 58-72.
[10] Gottardi, G. and Govoni, L., “Full-scale Modelling of Falling Rock Protection Barriers”, Rock Mechanics and Rock Engineering, 2010, Vol. 43, No. 3, pp. 261-274.
[11] European Organisation for Technical Approvals, “Guideline for European Technical Approval of Falling Rock Protection Kits (ETAG 027)”, Brussels, February, 2012.
[12] Yu Z.X., Qiao Y.K., Zhao L., et.al. A simple analytical method for evaluation of flexible rockfall barrier part 1: working mechanism and analytical solution [J]. Advanced Steel Construction, 2018, Vol. 14, No. , pp. 115-141.
[13] Yu Z.X., Qiao Y.K., Zhao L., et.al. A simple analytical method for evaluation of flexible rockfall barrier part 2: application and full-scale test [J]. Advanced Steel Construction, 2018, Vol. 14, No. , pp. 142-165.
[14] Xu H., Gentilini G., Yu Z.X., et.al. An energy allocation based design approach for flexible rockfall protection barriers[J]. Engineering Structures. 2018, Vol. 173, pp. 831-852.
[15] Grassl, H., Bartelt, P., Ammann, W.J. and Roth, A., “Behavior, Design and Reliability of Highly Flexible Rockfall Protection Systems for Highways”, Proc. 53rd Highway Geology Symposium, California, 2002.
[16] Nicot, F., Cambou B. and Mazzoleni G., “Design of Rockfall Restraining Nets from a Discrete Element Modelling”, Rock Mechanics and Rock Engineering, 2001, Vol. 34, No. 2, pp. 99-118.
[17] Gentilini, C., Ubertini, F., Govoni, L., Gottardi, G. and Miranda, S.D., “Modelling of Falling Rock Protection Barriers”, International Journal of Physical Modelling in Geotechnics, 2011, Vol. 11, No. 4, pp. 126-137.
[18] Gentilini, C., Gottardi, G., Govoni, L., Mentani, A. and Ubertini, F., “Design of Falling Rock Protection Barriers using Numerical Models”, Engineering Structures, 2013, Vol. 50, No. 3, pp. 96-106.
[19] Escallón, J.P., Wendeler, C., Chatzi, E. and Bartelt, P., “Parameter Identification of Rockfall Protection Barrier Components through an Inverse Formulation”, Engineering Structures, 2014, Vol. 77, pp. 1-16.
[20] TB/T 3089—2004, “The Flexible Safety Net for Protection of Slope along the Line”, China Railway Publishing House, Beijing, 2004. ( in Chinese )